The high beam headlights come on slightly dimmer than normal when the following conditions have been met: • The ignition switch is in ON .
• The headlight switch is off, or in .
• The parking brake is released.
The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight switch is turned on.
Mazda 2. Laser Sensor
The Smart City Brake Support (SCBS) laser sensor is installed at the top of
the windscreen
near the rearview mirror.
Always keep the surface of the windscreen around the laser sensor clean to ...
Peugeot 208. Fuses under the bonnet
The fusebox is placed in the engine compartment near the battery (left-hand side).
Access to the fuses
Unclip the cover.
Change the fuse (see corresponding paragraph).
When you have finishe ...
Chevrolet Sonic. Radio Controls with Touchscreen
The infotainment system is operated by using the pushbuttons, menus shown on
the display, and steering wheel controls.
Turning the System On or Off
(Power): Press and hold to turn
the radio on ...