Peugeot 208: Moving off
Peugeot 208 Owners Manual
- Apply the parking brake.
- Select position P or N.
- Start the engine.
If this procedure is not followed, there is an audible signal, accompanied by the display of an warning message.
- With the engine running, press the brake pedal.
- Release the parking brake.
- Select position R, D or M.
- Gradually release the brake pedal.
The vehicle moves off immediately.
If position N is selected inadvertently while driving, allow the engine to return to idle then select position D to accelerate.
When the engine is running at idle, with the brakes released, if position R, D or M is selected, the vehicle moves even without the accelerator being pressed. When the engine is running, never leave children in the vehicle without supervision.
When carrying out maintenance with the engine running, apply the parking brake and select position P .
Other info:
Fiat Punto. Jump starting
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.
Proceed as follows:
Connect positive terminal ...
Fiat Punto. Controls
HAZARD LIGHTS
They come on when switch is
pressed regardless of the position of
the ignition key.
When the device is on, the switch is flashing and warning lights
and
on the cluster com ...
Nissan Micra. Locking with power door lock switch
(if so equipped)
To lock all the doors without a key, push the door
lock switch to the lock position 1 . When locking
the door this way, be certain not to leave the key
inside the vehicle.
To unlock all the ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
