This vehicle is equipped with a shift lock control. The shift lock control is designed to:
The shift lock control is always functional except in the case of an uncharged or low voltage (less than 9‐volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting.
To shift out of P (Park):
1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever to the desired position.
If still unable to shift out of P (Park):
1. Fully release the shift lever button.
2. Hold the brake pedal down and press the shift lever button again.
3. Move the shift lever to the desired position.
If you still cannot move the shift lever from P (Park), consult your dealer or a professional towing service.
The doors may lock when shifting from P (Park). See Automatic Door Locks.
Peugeot 208. Remote control problem
Following disconnection of the vehicle battery, replacement of the remote control
battery or in the event of a remote control malfunction, you can no longer unlock,
lock or locate your vehicle.
F ...
Renault Clio. Five door and estate versions
Reversing lights and rear fog
lights 12
Open the boot lid.
Unclip cover 13 and remove it.
Turn bulb holder 14 fully anticlockwise
and change the bulb.
To reassemble, proceed in the ...
Peugeot 208. "Auto sequential" mode
In the automated mode, you can resume control temporarily at any time using the
steering mounted control paddles.
The use of these paddles permits manual selection of the gears in situations
whic ...