■Shift Lever Operation+
Fully depress the clutch pedal to operate the shift lever and change gears, then slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into
, or
shift into one of the forward gears for a moment. This stops the gears so they
do not
“grind.”
NOTICE
Do not shift to before the
vehicle comes to a
complete stop.
Shifting to before stopping can
damage the
transmission.
NOTICE
Before downshifting, make sure the engine will not go into the tachometer’s red zone. Should this occur, it can severely damage your engine.
When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.
Recommended Shift Points Driving in the highest gear that allows the engine to run and accelerate smoothly helps to optimize fuel economy and effective emissions control. The following shift points are recommended:
If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. When this happens, you may experience a slight jolt.
Citroen C3. Petrol - diesel manual or automatic gearbox instrument panels
Panel grouping together the vehicle operation indication dials and warning
lamps.
Depending on the version, the instrument panel may have permanent back-lighting.
Dials
1. Rev counter.
Indic ...
Chevrolet Sonic. Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and
displays the %CHANGE message on the
DIC when it is necessary to change the engine oil and filter.
Remember, the oil ...
Peugeot 208. Folding the backrest
Move the corresponding front seat forward if necessary.
Check that the corresponding seat belt is positioned correctly against the
backrest and buckle it.
Place the head restraints in the ...