Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or ON.
Type A
Type B
CAUTION
To prevent accessory socket damage or electrical failure, pay attention to the following:
Noise may occur on the audio playback depending on the device connected to the accessory socket
Depending on the device connected to the accessory socket, the vehicle's electrical system may be affected, which could cause the warning light to illuminate. Disconnect the connected device and make sure that the problem is resolved. If the problem is resolved, disconnect the device from the socket and switch the ignition off. If the problem is not resolved, consult an expert repairer, we recommend an Authorised Mazda Repairer.
NOTE
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.
Ford Fiesta. Steering Wheel
Adjusting the Steering Wheel
WARNING
Do not adjust the steering wheel
when your vehicle is moving.
Note: Make sure that you are sitting in the
correct position. See Sitting in the Correct
Position.
...
Nissan Micra. Front fog lights (if so equipped)
To turn the front fog lights on, rotate the headlight
switch to the or
position, then rotate
the fog light switch to the position.
To turn them off, rotate the fog light switch to the
OFF p ...
Renault Clio. Maintenance and anti-pollution advice
Your vehicle complies with criteria for
recycling and recovering vehicles at the
end of their service life which will come
into force in 2015.
Some parts of your vehicle have therefore
been des ...