B-Class car manuals
Mazda 2: Fuel-Filler Flap and Cap - Fuel and Emission - Before Driving - Mazda2 Owners Manual

Mazda 2: Fuel-Filler Flap and Cap

Mazda2 Owners Manual

WARNING

When removing the fuel-fi ller cap, loosen the cap slightly and wait for any hissing to stop, then remove it: Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-fi ller cap is removed too quickly.

Before refuelling, stop the engine, and always keep sparks and fl ames away from the fi ller neck: Fuel vapour is dangerous. It could be ignited by sparks or fl ames causing serious burns and injuries.

Additionally, use of the incorrect fuelfi ller cap or not using a fuel-fi ller cap may result in a fuel leak, which could result in serious burns or death in an accident.

Do not continue refuelling after the fuel pump nozzle shuts off automatically: Continuing to add fuel after the fuel pump nozzle has shut off automatically is dangerous because overfi lling the fuel tank may cause fuel overfl ow or leakage. Fuel overfl ow and leakage could damage the vehicle and if the fuel ignites it could cause a fi re and explosion resulting in serious injury or death.

CAUTION

Always use only a designated Mazda fuel-fi ller cap or an approved equivalent, available at an expert repairer, we recommend an Authorised Mazda Repairer. The wrong cap can result in a serious malfunction of the fuel and emission control systems.

Fuel-Filler Flap

To open, pull the remote fuel-fi ller fl ap release.

To close, press the fuel-fi ller fl ap until it locks securely.

Fuel-Filler Flap


Fuel-Filler Cap

To remove the fuel-fi ller cap, turn it anticlockwise.

Attach the removed cap to the inner side of the fuel fl ap.

To close the fuel-fi ller cap, turn it clockwise until a click is heard.

Fuel-Filler Cap


    Fuel and Engine Exhaust Precautions

    Steering Wheel

    Other info:

    Honda Fit. Brake System
    Parking Brake Use the parking brake to keep the vehicle stationary when parking. To apply: Pull the lever fully up without pressing the release button. To release: 1. Pull the lever slightly ...

    Chevrolet Sonic. License Plate Lamp
    Lamp Assembly Bulb Assembly 1. Bulb Socket 2. Bulb 3. Lamp Assembly To replace one of these bulbs: 1. Push the left end of the lamp assembly toward the right. 2. Turn the lamp assembly down ...

    Chevrolet Sonic. Conversions and Add-Ons
    Add-On Electrical Equipment Caution Some electrical equipment can damage the vehicle or cause components to not work and would not be covered by the warranty. Always check with your dealer before ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0072