The ignition must be switched ON to use the turn and lane-change signals.
Direction Indicators
Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.
If the indicator light continues to fl ash after a turn, manually return the lever to its original position.
The direction indicators (green) in the instrument cluster fl ash according to the operation of the direction indicator lever to show which signal is working.
NOTE
Lane-Change Signals
Move the lever halfway toward the direction of the lane change—until the indicator fl ashes— and hold it there. It will return to the off position when released.
Three-Flash Turn Signal
To signal a lane change, operate the direction indicator lever up or down slightly and release. After releasing the lever, the direction indicator fl ashes three times.
NOTE
The three-fl ash turn signal function can be switched to operable/inoperable using the personalisation function.
Refer to Personalisation Features on page 9-13 .
Mazda 2. Interior Equipment (View A)
Door-lock knob
Turn and lane-change signal
Lighting control
Wiper and washer lever
DSC OFF switch
Tyre pressure monitoring system set switch
i-stop OFF switch
Headlight Levelling ...
Skoda Fabia. Avoiding damage to your vehicle
General information
Pay attention to low-slung parts of the vehicle, such as the spoiler and
exhaust,
particularly in the following situations.
When driving on poorly maintained roads and trac ...
Fiat Punto. ABS system
The car is fitted with an ABS braking system, which
prevents the wheels from locking when braking, makes
the most of road grip and gives the best control when
emergency braking under difficult road ...