The cruise control allows driving at a speed between 23 - 89 mph (37 - 144 km/h) without keeping your foot on the accelerator pedal.
To turn on the cruise control, push the ON/OFF switch. The CRUISE indicator light in the instrument panel comes on.
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed.
To cancel the preset speed, use one of the following three methods.
The cruise control is automatically canceled if:
The preset speed is deleted from memory.
To reset at a faster cruising speed, use one of the following three methods.
When the vehicle attains the speed you desire, release the switch.
Each time you do this, the set speed increases by about 1 mph (1.6 km/h).
To reset at a slower cruising speed, use one of the following three methods.
Each time you do this, the set speed decreases by about 1 mph (1.6 km/h).
To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 23 mph (37 km/h).
Skoda Fabia. Manual gear shifting and pedals
Manual gear changing
Fig. 104 Shift pattern of the 5-speed manual gearbox
Always depress the clutch pedal all the way down. This prevents uneven wear
on the clutch.
The gearshift indicato ...
Peugeot 208. Cruise control
System which automatically maintains the speed of the vehicle at the value programmed
by the driver, without any action on the accelerator pedal.
The cruise control is switched on manually: it requ ...
Peugeot 208. Display in the instrumental panel
Gear lever positions
N . Neutral
R . Reverse
1, 2, 3, 4, 5. Gears in sequential mode
AUTO. This comes on when the automated mode is selected. It switches off on changing
to sequential mode.
& ...