B-Class car manuals
Nissan Micra: Drive belt - Maintenance and do-it-yourself - Nissan Micra Owners Manual

Nissan Micra: Drive belt

Nissan Micra Owners Manual

Nissan Micra. HR16DE engine
HR16DE engine

  1. Water pump pulley
  2. Generator pulley
  3. Crankshaft pulley
  4. Air conditioner compressor pulley (if so equipped) /Idler pulley (if so equipped)
  5. Manual tensioner pulley

Tension checking point


WARNING Be sure the ignition switch is placed in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly.
  1. Visually inspect the belt for signs of unusual wear, cuts, or fraying. If the belt is in poor condition, have it replaced or adjusted by a NISSAN dealer.
  2. Have the belt checked regularly for condition.
    Battery

    Spark plugs

    Other info:

    Nissan Micra. Automatic transmission (if so equipped)
    The ignition lock is designed so the key cannot be turned to the LOCK position and removed until the shift lever is placed in the P (Park) position. When removing the key from the ignition sw ...

    Honda Fit. Protecting Child Passengers
    Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of death of ...

    Peugeot 208. Operating fault
    When the ignition is on, the lighting of this warning lamp, accompanied by an audible signal and a message in the multifunction screen, indicates a gearbox fault. In this case, the gearbox switc ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0094