Hold the coated parts A when removing or resetting the support rod. Avoid direct contact with the metal parts, as they may be hot immediately after the engine has been stopped.
When closing the hood, return the support rod to its original position, lower the hood to approximately 30 cm (12 in) above the latch and release it. This allows proper engagement of the hood latch.
WARNING
|
Honda Fit. Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting
upright and well
back in the seat:
1. Pull the seat belt out slowly.
2. Insert the latch plate into the buckle, then
tu ...
Chevrolet Sonic. Instrument Panel Fuse Block
The instrument panel fuse block is on the underside of the driver side instrument
panel.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
...
Peugeot 208. Locking the vehicle with full alarm system
Activation
Switch off the ignition and get out of the vehicle.
Press the locking button
on the remote control.
The monitoring system
is active: the indicator lamp in the button flashes ...