WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. |
For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and the child restraint is greater than 65 lbs (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats:
Rear-facing – step 1
Always follow the child restraint manufacturer’s instructions.
Rear-facing – step 2
Rear-facing – step 3
Rear-facing – step 4
Rear-facing – step 5
Rear-facing – step 6
After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
Mazda 2. SRS Air Bag Deployment Criteria
This chart indicates the applicable SRS equipment that will deploy depending
on the type of
collision.
(The illustrations are the representative cases of collisions.)
X : The SRS air bag eq ...
Nissan Micra. Controls
Rear window defroster switch
Fan control dial
A/C (air conditioner) button (if so
equipped)
Temperature control dial
Air intake lever (Outside air circulation/
Air recirculation)
...
Citroen C3. Steering wheel adjustment
The height and reach of the steering
wheel can be adjusted to adapt the driving
position to the size of the driver.
Adjustment
When stationary , pull the control to
unlock the steering w ...