Peugeot 208: Locking the vehicle with exterior perimeter monitoring only
Peugeot 208 Owners Manual
Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as:
- leaving a pet in the vehicle, - leaving a window partially open, - washing your vehicle.
Deactivation of the interior volumetric monitoring
Switch off the ignition.
Within ten seconds, press the button until the indicator lamp is on continuously.
Get out of the vehicle.
Press the locking button on the remote control immediately.
The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second.
To be effective, this deactivation must on the remote control. be carried out each time the ignition is switched off.
Reactivation of the interior volumetric monitoring
Press the unlocking
button on the remote control to deactivate the exterior perimeter monitoring.
Press the locking button
on the remote control to activate all the monitoring functions.
The indicator lamp in
the button again flashes once per second.
Other info:
Fiat Punto. To open the bonnet
Proceed as follows:
pull lever (A) in the direction of the arrow;
press lever (B) as shown by the arrow;
open the bonnet and release the rod (C) from its clip at the same
time. Insert the en ...
Fiat Punto. Engine oil
Checking engine oil
Check the oil level a few minutes (about 5) after the engine has stopped,
with the car parked on level ground.
Check that the level is within the MIN and MAX marks on the dips ...
Renault Clio. Additional methods of restraint
All of the warnings below are given so that the airbag is not obstructed in
any way when it is inflated and also to prevent
the risk of serious injuries caused by items which may be dislodged when ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
