When the vehicle has moved off, select position M to change to manual mode.
- Pull the lever towards the + sign to change up a gear.
- Push the lever towards the - sign to change down a gear.
The gears engaged appear successively
in the instrument panel screen.
The gear change requests are only carried out if the engine speed permits.
It is not necessary to release the accelerator during gear changes.
When braking or slowing down, the gearbox changes down automatically to permit acceleration in the correct gear.
At very low speed, if reverse gear is requested, this will only be taken into account when the vehicle is immobilised. A warning lamp appears in the instrument panel screen.
On sharp acceleration, the gearbox will not change up unless the driver acts on the gear lever or the steering mounted paddles.
Never select neutral N while the vehicle is moving.
Only engage reverse gear R when the vehicle is immobilised with the brake pedal pressed.
Peugeot 208. Towing your vehicle
On the front bumper, unclip the cover by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Place the gear lever in neutral (position N on an electronic gearbox ...
Renault Clio. Fuses
Fuses in passenger compartment A
If any electrical component does not
work, check the condition of the fuses.
Unclip the access flap A.
To comply with current legislation, or
as a ...
Honda Fit. Childproof Door Locks
The childproof door locks prevent the rear doors from being opened from the
inside
regardless of the position of the lock tab.
To open the door from the inside when the
childproof door lock is on ...