B-Class car manuals
Peugeot 208: Programming - Cruise control - Driving - Peugeot 208 Owners Manual

Peugeot 208: Programming

Peugeot 208 Owners Manual


Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE).

Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)).

You can then change the programmed speed using buttons 2 and 3:

- by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.

Switch off the cruise control by pressing button 4 : the screen confirms that it has been switched off (PAUSE).

Switch the cruise control back on by pressing button 4 again.

    Displays in the instrument panel

    Exceeding the programmed speed

    Other info:

    Honda Fit. Audio System Theft Protection
    The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. ■ Entering the Audio Security Code ENTER CODE appears on ...

    Peugeot 208. Hill start assist
    System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal. T ...

    Chevrolet Sonic. Rear Vision Camera (RVC)
    This vehicle may have the RVC system. Read this entire section before using it. The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning T ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0157