Your vehicle has been approved in accordance with the new ISOFIX regulation .
The seats, represented below, are fitted with regulation ISOFIX mountings:
There are three rings for each seat:
- two rings A , located between the vehicle seat back and cushion, indicated by a label,
- a ring B behind the seat for fixing the upper strap, referred to as the T op Tether.
This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in your vehicle.
When fitting an ISOFIX child seat to the left hand rear seat, before fitting the seat, first move the centre rear seat belt towards the middle of the vehicle, so as to avoid the seat interfering with the operation of the seat belt. The ISOFIX child seats are fitted with two latches which are secured on the two rings A. Some seats also have an upper strap, known as the Top Tether, which is attached to ring B. To attach this strap, raise or remove the vehicle seat's head restraint then pass the strap over the backrest. Attach the strap by its hook on ring B and then fully tighten the upper strap.
The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident.
For information regarding the ISOFIX child seats which can be installed in your vehicle, refer to the table showing the locations for installing ISOFIX child seats.
Citroen C3. USB reader
This connection box, consisting of a
JACK socket and a USB port, is located
on the centre console.
It permits the connection of portable
equipment, such as a digital audio player
of the iPo ...
Seat Ibiza. Diesel engine 1.9 TDI 118kW
General engine data
a) BIODIESEL is NOT suitable as fuel for this engine. b) Cetane-Number
(cetane index) = Measure of the combustion power of the diesel
Performance figures
Weights
Engine ...
Renault Clio. Engine oil level: topping up, filling
Topping up/filling
The vehicle must be parked on level
ground and the engine should be cold
(for instance, before the engine is started
up for the first time in the day).
Before perfor ...