1. Brake lamps (P21W).
2. Reversing lamps (R10W).
3. Direction indicators (PY21W amber).
4. Sidelamps (light emitting diodes - LEDs).
5. Foglamp (P21W).
Changing the light emitting diode-LED lamps i
For replacement, contact a PEUGEOT dealer or qualified workshop.
Changing brake lamp, reversing lamp and direction indicator bulbs
These three bulbs are changed from inside the boot:
To reassemble, carry out these operations in reverse order.
Take care to engage the lamp unit in its guides, while keeping it in line with the vehicle. Tighten sufficiently to ensure sealing, but without damaging the lamp.
Changing the third brake lamp bulbs
To refit, carry out these operations in reverse order.
Number plate lamps
To facilitate the removal of the lamp, carry out this operation with the tailgate half open.
To refit, press on the lens to clip it in place.
Changing a foglamp bulb
Access is by passing a hand under the bumper.
To refit, carry out these operations in reverse order.
You can also contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
Renault Clio. Electronic stability program
(ESC) with understeer control
and traction control
Electronic stability control ESC
This system helps you to keep control
of the vehicle in critical driving conditions
(avoiding an obstacle, loss of grip
on a bend, etc.).
Operating principle
A s ...
Chevrolet Sonic. General Information
Your vehicle is an important investment. This section describes the required
maintenance for the vehicle. Follow this schedule to help protect against major
repair expenses resulting from neglect ...
Citroen C3. Changing a wheel
Procedure for changing a faulty wheel
for the spare wheel using the tools provided
with the vehicle.
Access to the tools
The tools are installed in the boot under
the fl oor.
To gain access ...