B-Class car manuals
Peugeot 208: Resuming manual control - Dual-zone digital air conditioning - Comfort - Peugeot 208 Owners Manual

Peugeot 208: Resuming manual control

Peugeot 208 Owners Manual

Depending on your requirements, you can make a different selection from that offered by the system by changing a setting. The other functions will still be controlled automatically.

Press the "AUTO" button
to return to fully automatic operation.

For maximum cooling or heating of the passenger compartment, you can exceed the minimum value of 14 or the maximum value of 28.

Push the switch 2 or 3 down until "LO" is displayed or up until "HI" is displayed.

5. Air conditioning On/Off


The air conditioning is designed to operate efficiently in all seasons, with the windows closed.

It allows you:

- in summer, to lower the temperature, - in winter, above 3 °C, to improve demisting.

Switching on

Press the " A/C" button, the associated indicator lamp comes on.

The air conditioning cannot operate when the air flow is set to off.

Switching off

Press the "A/C" button again; the associated indicator lamp goes off.

Switching off may cause some problems (humidity, misting).

6. Air distribution adjustment


 Press this button several times in succession to direct the air flow in turn towards:

- the windscreen, the side windows and the footwells, - the windscreen and side windows (demisting or defrosting), - the central and side vents, - the central vents, the side vents and the footwells, - the footwells.

7. Air fl ow adjustment

Press this "full fan"
button to increase the air flow.

The air flow symbol (a fan) appears in the screen. It is filled in progressively in relation to the value required.

Press this "empty fan"
button to reduce the air flow.

 

8. Air intake/Air recirculation


Press this button to recirculate the interior air. The indicator lamp in the button comes on and the air recirculation symbol is displayed.

Air recirculation prevents exterior odours and smoke from entering the passenger compartment. It is activated automatically when operating the screen wash.

As soon as possible, press this button be felt. again to permit the intake of exterior air and prevent misting. The indicator lamp in the button goes off.

Avoid prolonged operation in interior air recirculation mode (risk of misting and of deterioration of the air quality).

    Automatic operation

    Switching the system off

    Other info:

    Fiat Punto. Refitting the standard wheel
    Proceed as follows: Following the procedure described previously, raise the car and remove the spare wheel; Make sure the contact surfaces between wheel and hub are clean so that the fas ...

    Chevrolet Sonic. Making a Call Using Phone Book
    For cell phones that support the phone book feature, the Bluetooth system can use the contacts stored on your cell phone to make calls. See your cell phone's owner's guide or contact your wireless ...

    Citroen C3. Petrol - diesel manual gearbox instrument panels
    Panel grouping together the vehicle operation indication dials and warning lamps. Dials 1. Rev counter. Indicates the speed of rotation of the engine (x 1 000 rpm). 2. Vehicle speed. Indi ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0092