Peugeot 208: Starting using another battery
Peugeot 208 Owners Manual
Peugeot 208 / Peugeot 208 Owners Manual / Practical information / Battery / Starting using another battery
- Connect the red cable to the positive terminal (+) of the flat battery A , then to the positive terminal (+) of the slave battery B.
- Connect one end of the green or black cable to the negative terminal (-) of the slave battery B.
- Connect the other end of the green or black cable to the earth point C on your vehicle (engine mounting).
- Operate the starter, let the engine run.
- Wait until the engine returns to idle and disconnect the cables.
Other info:
Honda Fit. If the Brake System Indicator Comes On
■ Reasons for the indicator to come on
• The brake fluid is low.
• There is a malfunction in the brake system.
■ What to do when the indicator comes on while driving
Press the ...
Peugeot 208. Driving advice
Distribution of loads
Distribute the load in the trailer so that the heaviest items are as close as
possible to the axle and the nose weight approaches the maximum permitted without
exceeding it. ...
Renault Clio. Brake fluid
The level should be read with the engine
switched off and on level ground.
This should be checked frequently,
and immediately if you notice even the
slightest loss in braking efficiency.
...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
© 2016-2024 Copyright www.b-auto.net 0.0103