B-Class car manuals
Chevrolet Sonic: What to Use - Engine Coolant - Vehicle Checks - Vehicle Care - Chevrolet Sonic Owners Manual

Chevrolet Sonic: What to Use

Chevrolet Sonic Owners Manual

Warning

Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will. The coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/ 50 mixture of clean, drinkable water and DEX-COOL coolant.

Use a 50/50 mixture of clean drinkable water and DEX-COOL coolant. This mixture:

  • Gives freezing protection down to −37°C (−34°F), outside temperature.
  • Gives boiling protection up to 129°C (265°F), engine temperature.
  • Protects against rust and corrosion.
  • Will not damage aluminum parts.
  • Helps keep the proper engine temperature.

Caution

If improper coolant mixture, inhibitors, or additives are used in the vehicle cooling system, the engine could overheat and be damaged. Too much water in the mixture can freeze and crack engine cooling parts. The repairs would not be covered by the vehicle warranty. Use only the proper mixture of engine coolant for the cooling system. See Recommended Fluids and Lubricants.

Never dispose of engine coolant by putting it in the trash, pouring it on the ground, or into sewers, streams, or bodies of water. Have the coolant changed by an authorized service center, familiar with legal requirements regarding used coolant disposal. This will help protect the environment and your health.

    Engine Coolant

    Checking Coolant

    Other info:

    Nissan Micra. List of commands
    When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu ...

    Honda Fit. Seat Belt Inspection
    Regularly check the condition of your seat belts as follows: • Pull each belt out fully, and look for frays, cuts, burns, and wear. • Check that the latches work smoothly and the belts retract e ...

    Manuals For Car Models



    © 2016-2019 Copyright www.b-auto.net