A top tether (3, 4) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (2) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
The child restraint may have a single tether (3) or a dual tether (4). Either will have a single attachment (2) to secure the top tether to the anchor.
Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint.
Chevrolet Sonic. Keys
Warning
Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter
is dangerous and children or others could be seriously injured or killed. They could
operate the power windows ...
Mazda 2. Starting a Flooded Engine
(SKYACTIV-G 1.3 and SKYACTIV-G 1.5 )
If the engine fails to start, it may be
fl ooded (excessive fuel in the engine).
Follow this procedure:
If the engine does not start within
fi ve seconds on the fi rst try, wait ten
second ...
Peugeot 208. Courtesy lamp
1. Front courtesy lamp
2. Map reading lamps
In this position, the courtesy lamp comes on gradually:
- when the vehicle is unlocked,
- when the key is removed from the ignition,
- when openi ...