The button for TCS and StabiliTrak is on the center console.
Caution
Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle driveline could be damaged.
To turn off only TCS, press and release the
button. The traction off light
displays in the instrument cluster.
To turn TCS on again, press and release the
button. The traction off light
displayed in the instrument cluster
will turn off.
If TCS is limiting wheel spin when the
button is pressed, the system will
not turn off until the wheels stop spinning.
To turn off both TCS and StabiliTrak, press and hold the
button until the traction off light
and StabiliTrak OFF Light
come on and stay on in the instrument
cluster.
To turn TCS and StabiliTrak on again, press and release the
button. The traction off light
and StabiliTrak OFF Light
in the instrument cluster turn off.
Adding accessories can affect the vehicle performance. See Accessories and Modifications.
Fiat Punto. Starting procedure for petrol
versions
Proceed as follows:
Ensure that the handbrake is up;
Put the gear lever into neutral;
Press the clutch pedal down to the floor without
touching the accelerator;
Turn the ignition key to AV ...
Honda Fit. Devices that Emit Radio Waves
The following products and systems on your vehicle emit radio waves when in
operation.
Each of the above complies with the appropriate requirements or the required
standards of FCC (Federal Commu ...
Skoda Fabia. Measurement of fuel consumption and CO2 emissions according to
ECE Regulations and EU Directives
The data on fuel consumption and CO 2 emissions were not available at the
time of going to press.
The data on fuel consumption and CO 2 emissions are given on the ŠKODA
websites or in the sa ...