B-Class car manuals
Chevrolet Sonic: Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire 
(Not Punctured) - Tire Sealant and Compressor Kit - Wheels and Tires - Vehicle Care - Chevrolet Sonic Owners Manual

Chevrolet Sonic: Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)

Chevrolet Sonic Owners Manual

Chevrolet Sonic / Chevrolet Sonic Owners Manual / Vehicle Care / Wheels and Tires / Tire Sealant and Compressor Kit / Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)

The kit includes:


1. Sealant Canister Inlet Valve 2. Sealant/Air Hose
3. Base of Sealant Canister 4. Tire Sealant Canister 5. On/Off Button
6. Slot on Top of Compressor 7. Pressure Deflation Button 8. Pressure Gauge


9. Power Plug
10. Air Only Hose

If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers.

See If a Tire Goes Flat  for other important safety warnings.

1. Remove the compressor from its storage location. See Storing the Tire Sealant and Compressor Kit.

2. Remove the air only hose (10) and the power plug (9) from the bottom of the compressor.

3. Place the compressor on the ground near the flat tire. Make sure the tire valve stem is positioned close to the ground so the hose will reach it.

4. Remove the valve stem cap from the flat tire by turning it counterclockwise.

5. Attach the air only hose (10) to the tire valve stem by turning it clockwise until tight.

6. Plug the power plug (9) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets.

If the vehicle has an accessory power outlet, do not use the cigarette lighter.

If the vehicle only has a cigarette lighter, use the cigarette lighter.

Do not pinch the power plug cord in the door or window.

7. Start the vehicle. The vehicle must be running while using the air compressor.

8. Press the on/off button (5) to turn the tire sealant and compressor kit on.

The compressor will inflate the tire with air only.

9. Inflate the tire to the recommended inflation pressure using the pressure gauge (8). The recommended inflation pressure can be found on the Tire and Loading Information label. See Tire Pressure.

The pressure gauge (8) may read higher than the actual tire pressure while the compressor is on. Turn the compressor off to get an accurate pressure reading. The compressor may be turned on/off until the correct pressure is reached.

Caution

If the recommended pressure cannot be reached after approximately 25 minutes, the vehicle should not be driven farther. The tire is too severely damaged and the tire sealant and compressor kit cannot inflate the tire. Remove the power plug from the accessory power outlet and unscrew the inflating hose from the tire valve. See Roadside Assistance Program.

10. Press the on/off button (5) to turn the tire sealant and compressor kit off.

Be careful while handling the compressor as it could be warm after usage.

11. Unplug the power plug (9) from the accessory power outlet in the vehicle.

12. Turn the air only hose (10) counterclockwise to remove it from the tire valve stem.

13. Replace the tire valve stem cap.

14. Return the air only hose (10) and power plug (9) back to their original storage location.

15. Return the equipment to its original storage location in the vehicle.

The tire sealant and compressor kit has accessory adapters located in a compartment on the bottom of its housing that can be used to inflate air mattresses, balls, etc.

    Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire

    Storing the Tire Sealant and Compressor Kit

    Other info:

    Peugeot 208. Child seat in the front
    "Rearwards-facing" When a "rearwards-facing" child seat is installed on the front passenger seat, it is essential that the passenger airbag is deactivated. Otherwise, the chil ...

    Chevrolet Sonic. Radio Frequency Statement
    This vehicle has systems that operate on a radio frequency that comply with Part 15 of the Federal Communications Commission (FCC) rules and with Industry Canada Standards RSS‐GEN/210/220/31 ...

    Citroen C3. Safety
    Selection of the left or right direction indicators to signal a change of direction of the vehicle. Lower the lighting stalk fully when moving to the left. Raise the lighting stalk full ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0089