You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations: ■ When the airbags have deployed
If an airbag has inflated, the control unit and other related parts must be replaced.
Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.
■ When the vehicle has been in a moderate-to-severe collision
Even if the airbags did not inflate, have your dealer inspect the following: the driver’s seat position sensor, weight sensors in the passenger’s seat, front seat belt tensioners, and each seat belt that was worn during the crash.
■ Do not remove or modify a front seat without consulting a dealer
This would likely disable the driver’s seat position sensor or the passenger’s weight sensors. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer, or for U.S. vehicles, American Honda Automobile Customer Service at 800-999-1009 and for Canadian vehicles, Honda Canada Customer Relations at 888-9-HONDA-9.
We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.
Chevrolet Sonic. Radio with Touchscreen
The infotainment system can play music or movies by connecting an auxiliary device
to the USB port, if equipped.
USB Support
USB Supported Devices
USB Flash Drives
Portable USB Hard Drives
...
Fiat Punto. Roof rack/ski rack
FASTENERS
3-door versions
Move the seal aside in the points shown in the figure to reach the
fasteners.
The rear fasteners are in the areas indicated by the printed
reference
mark on the rea ...
Renault Clio. Towing, attachments
Permissible nose weight, maximum
permissible towing weight,
braked and unbraked: refer to
the information on “Weights” in
Section 6.
For fitting and conditions of use,
...