B-Class car manuals
Nissan Micra: Head restraints/headrests - Safety—Seats, seat belts and supplemental restraint system - Nissan Micra Owners Manual

Nissan Micra: Head restraints/headrests

Nissan Micra Owners Manual

WARNING Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjustable head restraints/headrests must be adjusted properly, as specified in this section.

Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint/headrest stalks or remove the head restraint/headrest. Do not use the seat if the head restraint/headrest has been removed. If the head restraint/headrest was removed, reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraints/headrests. This may increase the risk of serious injury or death in a collision.

Nissan Micra. Head restraints/headrests


The illustration shows the seating positions equipped with head restraints/headrests.

Indicates the seating position is
equipped with a head restraint.

Indicates the seating position is
equipped with a headrest.

+ Indicates the seating position is not equipped with a head restraint or headrest (if applicable).

  • Your vehicle is equipped with a head restraint/headrest that may be integrated, adjustable or non-adjustable.
  • Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock them in a desired adjustment position.
  • The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame.
  • Proper Adjustment:
  • For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest.
  • If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
  • If the head restraint/headrest has been removed, ensure that it is reinstalled and locked in place before riding in that designated seating position.

Adjustable head restraint/headrest components

Nissan Micra. Adjustable head restraint/headrest components


  1. Removable head restraint/headrest
  2. Multiple notches
  3. Lock knob
  4. Stalks

Non-adjustable head restraint/headrest components

Nissan Micra. Non-adjustable head restraint/headrest components


  1. Removable head restraint/headrest
  2. Single notch
  3. Lock knob
  4. Stalks

Remove

Nissan Micra. Remove


Use the following procedure to remove the head restraint/headrest:

  1. Pull the head restraint/headrest up to the highest position.
  2. Push and hold the lock knob.
  3. Remove the head restraint/headrest from the seat.
  4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
  5. Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position.

Install

Nissan Micra. Install


  1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches) 1 must be installed in the hole with the lock knob 2 .
  2. Push and hold the lock knob and push the head restraint/headrest down.
  3. Properly adjust the head restraint/headrest before an occupant uses the seating position.

Adjust

Nissan Micra. Adjust


For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.

For non-adjustable head restraint/headrest

Nissan Micra. For non-adjustable head restraint/headrest


Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

Raise

Nissan Micra. Raise


To raise the head restraint/headrest, pull it up.

Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

Lower

Nissan Micra. Lower


To lower, push and hold the lock knob and push the head restraint/headrest down.

Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

    Folding rear seat

    Seat belts

    Other info:

    Peugeot 208. Reinitialisation of the electric windows
    Following reconnection of the battery, the safety anti-pinch function must be reinitialised. The safety anti-pinch is not active during these operations: - lower the window completely, then raise i ...

    Mazda 2. Laser Sensor
    The Smart City Brake Support (SCBS) laser sensor is installed at the top of the windscreen near the rearview mirror. Always keep the surface of the windscreen around the laser sensor clean to ...

    Skoda Fabia. Multifunction display (MFD)
    The multifunction display can only be operated when the ignition is switched on. After the ignition is switched on, the function displayed is the one which you last selected before switching off the ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0108