Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.
Mazda 2. Warning Sound is Activated
Lights-On Reminder
If lights are on and the ignition is switched
to ACC or the ignition is switched off, a
continuous beep sound will be heard when
the driver's door is opened.
NOTE
When the ...
Peugeot 208. Starting using another battery
Connect the red cable to the positive terminal (+) of the flat battery A
, then to the positive terminal (+) of the slave battery B.
Connect one end of the green or black cable to the negati ...
Fiat Punto. Parking sensors
The parking system detects and informs the driver (through an
intermittent acoustic signal) about the presence of obstacles in the rear
part of the car.
ACTIVATION
The sensors are automaticall ...