B-Class car manuals
Nissan Micra: Rear-facing child restraint installation using
LATCH - Child restraints - Safety—Seats, seat belts and supplemental restraint system - Nissan Micra Owners Manual

Nissan Micra: Rear-facing child restraint installation using LATCH

Nissan Micra Owners Manual

For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections of this manual before installing a child restraint.

Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and the child restraint is greater than 65 lbs (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

Follow these steps to install a rear-facing child restraint using the LATCH system:

  1. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.

Nissan Micra. Rear-facing webbing-mounted – step 2
Rear-facing webbing-mounted – step 2

  1. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure the LATCH attachment is properly attached to the lower anchors.

Nissan Micra. Rear-facing rigid-mounted – step 2
Rear-facing rigid-mounted – step 2

Nissan Micra. Rear-facing – step 3
Rear-facing – step 3

  1. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments.

    Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.

Nissan Micra. Rear-facing – step 4
Rear-facing – step 4

  1. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attachment path. The child restraint should not move more than 25 mm (1 in), from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint or try installing by using the vehicle seat belt (if applicable).

    Not all child restraints fit in all types of vehicles.

  2. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4.
    LATCH (Lower Anchors and Tethers for CHildren) system

    Rear-facing child restraint installation using the seat belts

    Other info:

    Nissan Micra. FM radio reception
    Range: FM range is normally limited to 40 – 48 km (25 – 30 mi) with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM ...

    Fiat Punto. Installing the tow hook
    The towing device should be fastened to the body by specialised personnel according to any additional and/or integrative information supplied by the Manufacturer of the device. The towing device ...

    Chevrolet Sonic. Drunk Driving
    Death and injury associated with drinking and driving is a global tragedy. Warning Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affec ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0109