B-Class car manuals
Nissan Micra: RearView Monitor system limitations - RearView Monitor (if so equipped) - Display screen, heater, air conditioner, audio and phone systems - Nissan Micra Owners Manual

Nissan Micra: RearView Monitor system limitations

Nissan Micra Owners Manual

Nissan Micra / Nissan Micra Owners Manual / Display screen, heater, air conditioner, audio and phone systems / RearView Monitor (if so equipped) / RearView Monitor system limitations

WARNING Listed below are the system limitations for RearView Monitor. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death.
  • The system cannot completely eliminate blind spots and may not show every object.
  • Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation. The system will not show small objects below the bumper, and may not show objects close to the bumper or on the ground.
  • Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used.
  • Objects in the RearView Monitor will appear visually opposite compared to when viewed in the rearview and outside mirrors.
  • Use the displayed lines as a reference.

    The lines are highly affected by the number of occupants, fuel level, vehicle position, road conditions and road grade.

  • Make sure that the trunk is securely closed when backing up.
  • Do not put anything on the rearview camera. The rearview camera is installed above the license plate.
  • When washing the vehicle with high pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
  • Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.

The following are operating limitations and do not represent a system malfunction:

  • When the temperature is extremely high or low, the screen may not clearly display objects.
  • When strong light directly shines on the camera, objects may not be displayed clearly.
  • Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper.
  • The screen may flicker under fluorescent light.
  • The colors of objects on the RearView Monitor may differ somewhat from the actual color of objects.
  • Objects on the monitor may not be clear in a dark environment.
  • There may be a delay when switching between views.
  • If dirt, rain or snow accumulate on the camera, RearView Monitor may not display objects clearly. Clean the camera.
  • Do not use wax on the camera lens. Wipe off any wax with a clean cloth dampened with a diluted mild cleaning agent, then wipe with a dry cloth.
    Adjusting the screen

    System maintenance

    Other info:

    Peugeot 208. Checking tyre pressures / inflating accessories
    You can also use the compressor, without injecting any product, to: - check or adjust the pressure of your tyres, - inflate other accessories (balls, bicycle tyres...). Turn the selector A to ...

    Seat Ibiza. Brief introduction
    Dear SEAT Driver Safety first! This chapter contains important information, tips, suggestions and warnings that you should read and follow in the interest of your own safety and the safety of yo ...

    Mazda 2. Push-Starting
    Do not push-start your Mazda. WARNING Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0094