B-Class car manuals
Peugeot 208: Changing a fuse - Changing a fuse - Practical information - Peugeot 208 Owners Manual

Peugeot 208: Changing a fuse

Peugeot 208 Owners Manual

Before changing a fuse:

  • the cause of the failure must be identified and rectified,
  • all electrical consumers must be switched off,
  • the vehicle must be immobilised with the ignition off,
  • identify the failed fuse using the tables and layout drawings in the following pages.

To replace a fuse, you must:

  • use the special tweezer to extract the fuse from its housing and check the condition of its filament.
  • always replace the failed fuse with a fuse of the same rating (same colour); using a different rating could cause faults (risk of fire).

If the fuse fails again soon after replacement, have the vehicle's electrical system checked by a PEUGEOT dealer or a qualified workshop.


Good


Failed


Tweezer

The replacement of a fuse not shown in the tables below may cause a serious malfunction of your vehicle. Contact a PEUGEOT dealer or a qualified workshop.

Installing electrical accessories

Your vehicle's electrical system is designed to operate with standard or optional equipment.

Before installing other electrical equipment or accessories on your vehicle, contact a PEUGEOT dealer or a qualified workshop.

PEUGEOT will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instructions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.

    Access to the tools

    Fuses in the dashboard

    Other info:

    Mazda 2. Operational Range
    The system operates only when the driver is in the vehicle or within operational range while the key is being carried. NOTE When the battery power is low, or in places where there are high-intens ...

    Chevrolet Sonic. Wheels and Trim—Aluminum or Chrome
    Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied. Caution Chrome wheels and ...

    Mazda 2. Light Bulbs
    Headlights (Low/High beam) Headlights (Low beam) Headlights (High beam) Running lights * /Position lights Front fog lights * Front direction indicator lights Side direction indicator ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.009