B-Class car manuals
Peugeot 208: Front lamps - Changing a wheel - Practical information - Peugeot 208 Owners Manual

Peugeot 208: Front lamps

Peugeot 208 Owners Manual


A. Model with light guide

1. Main beam headlamps (H7-55W).

2. Dipped beam headlamps (H7-55W).

3. Daytime running lamps / sidelamps (light emitting diodes - LEDs).

4. Direction indicators (PWY-24W).

5. Front foglamps (directional according to version) (H11-55W)).


B. Model without light guide

1. Main beam headlamps (H7-55W).

2. Dipped beam headlamps (H7-55W).

3. Daytime running lamps / sidelamps (W5-5W).

4. Direction indicators (PWY-24W).

5. Front foglamps (directional according to version) (H11-55W).

In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.


Changing direction indicator bulbs

Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side.

  • Turn the bulb holder a quarter of a turn and extract it.
  • Pull out the bulb and change it.

To reassemble, carry out these operations in reverse order.

Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.

When refitting, close the protective cover carefully to preserve the sealing of the headlamp.


Changing dipped beam headlamp bulbs

  • Remove the protective cover by pulling on the tab.
  • Disconnect the bulb connector.
  • Spread the spring to release the bulb (model A ).
  • Extract the bulb and change it.


To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom (model A ) or at the top (model B) .


Changing main beam headlamp bulbs

  • Remove the protective cover by pulling on the tab.
  • Disconnect the bulb connector.
  • Pull out the bulb and replace it.


To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom.


Changing daytime running lamp / sidelamp bulbs

Turn the bulb holder a quarter turn and pull it out.

Pull out the bulb and replace it.

To reassemble, carry out these operations in reverse order.


Changing the daytime running lamps / sidelamps (light-emitting diodes - LEDs)

For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.


Changing front foglamp / directional lamps

  • Access to the front foglamp is through the orifice below the bumper.
  • Disconnect the bulb holder connector by pressing on the top of the tongue.
  • Extract the bulb holder by pressing on the two clips clips (top and bottom).
  • Replace the module.

To reassemble, carry out these operations in reverse order.

To obtain this module, contact a PEUGEOT dealer or a qualified workshop. You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.


Changing integrated direction indicator side repeater bulbs

  • Insert a flat screwdriver between the mirror glass and its base.
  • Use the screwdriver as a lever to extract the mirror glass.
  • Unclip the mirror shell by pressing on the two retaining clips.


  • Press the central tongue and remove the side repeater. i
  • Pull the bulb holder out and replace the failed bulb.

To reassemble, carry out these operations in reverse order.

You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.

    Changing a bulb

    Rear lamps

    Other info:

    Chevrolet Sonic. Starter Switch Check
    Warning When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    Seat Ibiza. Towing and tow-starting
    Tow-starting The use of jump leads is preferable to tow-starting. We recommend that you do not tow-start your vehicle. Jump-starting is preferable. However, if your vehicle has to be tow-started: ...

    Mazda 2. Recording of Vehicle Data
    This vehicle is equipped with a computer which records the following main vehicle data related to vehicle controls, operation, and other driving conditions. Recorded data Vehicle conditions su ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0081