Peugeot 208: Operating fault
Peugeot 208 Owners Manual
When the ignition is on, the lighting
of this warning lamp, accompanied by an audible signal and a message in the multifunction
screen, indicates a gearbox fault.
In this case, the gearbox switches to back-up mode and is locked in 3rd gear. You may feel a substantial knock when changing from P to R and from N to R . This will not cause any damage to the gearbox.
Do not exceed 60 mph (100 km/h), local speed restrictions permitting.
Contact a PEUGEOT dealer or a qualified workshop as soon as possible.
There is a risk of damage to the gearbox:
- if you press the accelerator and brake pedals at the same time, - if you force the movement of the gear lever from the P position to another position when the battery is flat.
To reduce fuel consumption when at a prolonged standstill with the engine running (traffic jam...), put the gear lever in the N position and apply the parking brake.
Other info:
Seat Ibiza. Pedal area
Pedals
The operation and freedom of movement of all pedals must never be impaired by
objects or floor mats. – Ensure that you can always press the accelerator, brake
and clutch pedals unimpaire ...
Seat Ibiza. Tailgate
Opening and locking
The operation of the tailgate opening system is electric. It is activated by
using the handle on the tailgate
Fig. 50 Boot lid: opening from the outside
Fig. 51 Closing th ...
Peugeot 208. Warning lamps
When the engine is running or the vehicle is being driven, illumination of one
of the following warning lamps indicates a fault which requires action on the part
of the driver.
Any fault resultin ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
