Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
Set the speed value by pressing button 2 or 3 (e.g.: 55 mph (90 km/h)). You can then change the programmed speed using buttons 2 and 3:
- by + or - 1 mph (km/h) = short press, - by + or - 5 mph (km/h) = long press, - in steps of + or - 5 mph (km/h) = maintained press.
Honda Fit. Maintenance MinderTM
If the engine oil life is less than 15%, you will see the Maintenance Minder
messages
appear on the information display every time you turn the ignition switch to ON
.
The messages notify you w ...
Peugeot 208. Starting using another battery
Connect the red cable to the positive terminal (+) of the flat battery A
, then to the positive terminal (+) of the slave battery B.
Connect one end of the green or black cable to the negati ...
Chevrolet Sonic. Lane Departure Warning (LDW) Light
This light comes on briefly while starting the vehicle. If it does not, have
the vehicle serviced by your dealer. If the system is working normally, the light
then turns off.
This light comes o ...