Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you put the gear lever into neutral, and you release the clutch pedal, - with an electronic gearbox , at speeds below 5 mph (8 km/h), when you press the brake pedal or you put the gear lever into position N .
Going into engine START mode
The "ECO" warning lamp goes off and the engine restarts:
- with a manual gearbox, when you press the clutch pedal, - with an electronic gearbox: ● with the gear lever in position A or M, when you release the brake pedal, ● or with the gear lever in position N and brake pedal released, when you move the gear lever to position A or M, ● or when you engage reverse.
Deactivation / Reactivation
You can deactivate the system at any time by pressing the "ECO OFF" button; the button's warning lamp comes on.
The system is automatically reactivated every time the engine is started with the key.
Before refuelling or doing anything under the bonnet, you must switch off the ignition with the key.
Citroen C3. Wiper controls
System for selection and control of the
various front and rear wiping modes for
the elimination of rain and cleaning.
The vehicle's front and rear wipers are
designed to improve the driver's vi ...
Mazda 2. Spare Tyre and Tool Storage
Spare tyre and tools are stored in the locations illustrated in the diagram.
*1 The jack point attachment can be used by vehicle repair shops and road
assistance services.
Consult an Authori ...
Renault Clio. Steering wheel/Power-assisted steering
Adjusting the steering wheel height and depth
Pull lever 1 and place the steering
wheel in the required position; push the
lever beyond the point of resistance to
lock the steering wheel in pl ...