Renault Clio: Luggage compartment cover: estate version

Renault Clio IV (2014-2019) Owners Manual / Your comfort / Luggage compartment cover: estate version

To remove the flexible section of the luggage compartment cover 1

Renault Clio. To remove the flexible section of the luggage compartment cover 1


Pull handle 2 gently to release the pins from their mounting points located on each side of the luggage boot.

Guide the luggage cover onto the roller.

Removing the luggage compartment cover

Renault Clio. Removing the luggage compartment cover


Using the handle 2, push the luggage cover to the right (movement A) and lift the left-hand side (movement B) in the inertia reel.

To refit the luggage cover, insert the right-hand side, then push it to the right (movement A) and lower the left-hand side of the inertia reel into its housing.

Luggage compartment cover storage 1

Renault Clio. Luggage compartment cover storage 1


Lift the mobile floor (please refer to the information on “Boot storage space and fittings” in section 3).

Store the luggage compartment cover by inserting it, one side at a time.

Replace the mobile floor.

Do not place any objects, especially heavy or solid objects on the luggage compartment cover. These may pose a risk to the vehicle occupants if the driver has to brake suddenly or if the vehicle is involved in an accident.

READ NEXT:

 Boot storage

Mobile floor When fitted to the vehicle, it can be used to make loading easier. Note: if you need to access the ISOFIX ring and/or the net ring at the bottom of the boot, open flap 3.

 Transporting objects in the boot

Always position the objects transported so that the largest surface is against: The rear bench seatback for normal loads (example A). The front seatbacks with the rear seatbacks

 Transporting objects

SEE MORE:

 Centre Lower Structure

Centre floor front side cross member: General description IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for

 Sill panel extension: Removal - Refitting

EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (1). Detach the decorative strip (2). Note: Replace the decorative strip (2) every time it is removed. Remove the bolts (3). Detach the double-sided tape (4) using the (Car.1

© 2016-2024 Copyright Renault Clio Owners Club