Renault Clio: Towing, attachments

Renault Clio. Towing, attachments


Permissible nose weight, maximum permissible towing weight, braked and unbraked: refer to the information on “Weights” in Section 6.

For fitting and conditions of use, refer to the equipment’s fitting instructions.

Please keep these instructions with the rest of the vehicle documentation.

Renault Clio. Towing, attachments


A: 697 mm (5-door version).

A: 697 mm (Utility version).

A: 948 mm (Estate version).

If the towbar ball obscures the registration plate or the rear fog lights, it should be removed when not in use.

In all cases, comply with local legislation.

READ NEXT:

 Luggage net

Luggage net A On equipped vehicles, this can be used when transporting animals or luggage, to separate them from the passenger section. It can be positioned: behind the front seats; b

 Roof bars/Spoiler

Accessing the mounting points Open the doors to access the mounting points 1. If original roof bars, approved by our Technical Department, are supplied with screws, only use the

 Multimedia equipment

The presence and location of this equipment depends on the vehicle version. Multimedia touchscreen; Multimedia sockets; Steering column control; Voice commands; Microphone. Refe

SEE MORE:

 D4F, and 784 or 786

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see ) (MR 392, 80A, Battery). Remove: the engine undertray, the engine cover, the front bumper (see Front bumper:

 Particle filter temperature sensors: Removal - Refitting

K9K, and 772 The particle filter must be removed in order to remove the catalytic converter upstream temperature sensor. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Disconnect the battery (s

© 2016-2024 Copyright Renault Clio Owners Club