Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly. The operation of the airbag system can also be affected by changing any parts of the front seats, safety belts, the airbag sensing and diagnostic module, steering wheel, instrument panel, any of the airbag modules, ceiling or pillar garnish trim, front sensors, side impact sensors, or airbag wiring.
Your dealer and the service manual have information about the location of the airbag sensors, sensing and diagnostic module, and airbag wiring.
In addition, the vehicle has a passenger sensing system for the front outboard passenger position, which includes sensors that are part of the passenger seat. The passenger sensing system may not operate properly if the original seat trim is replaced with non-GM covers, upholstery, or trim; or with GM covers, upholstery, or trim designed for a different vehicle. Any object, such as an aftermarket seat heater or a comfort-enhancing pad or device, installed under or on top of the seat fabric, could also interfere with the operation of the passenger sensing system. This could either prevent proper deployment of the passenger airbag(s) or prevent the passenger sensing system from properly turning off the passenger airbag(s). See Passenger Sensing System.
The vehicle has rollover roof-rail airbags. See Different Size Tires and Wheels for additional important information.
If you have to modify your vehicle because you have a disability and have questions about whether the modifications will affect the vehicle's airbag system, or if you have questions about whether the airbag system will be affected if the vehicle is modified for any other reason, call Customer Assistance. See Customer Assistance Offices.
Peugeot 208. Folding the backrest
Move the corresponding front seat forward if necessary.
Check that the corresponding seat belt is positioned correctly against the
backrest and buckle it.
Place the head restraints in the ...
Skoda Fabia. Preparations for using the breakdown kit
The following preparatory work must be carried out before using the breakdown
kit.
Park the vehicle as far away as possible from the flow of traffic. Park
on as
flat and firm a surface as po ...
Seat Ibiza. What you should be aware of
General notes
All data in the official vehicle documents take precedence over this data.
All data in these documents are valid for the basic model as offered in Spain.
The vehicle data card includ ...