If the battery on the vehicle has been recharged or disconnected, or is not working, the windows will need to be reprogrammed for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery.
To program the driver window:
1. With the ignition in ACC/ ACCESSORY or ON/RUN, or when RAP is active, close all doors.
2. Press and hold the power window switch until the window is fully open.
3. Pull the power window switch up until the window is fully closed.
4. Continue holding the switch up for approximately two seconds after the window is completely closed.
The window is now reprogrammed.
Fiat Punto. Conditions of use
Cold starting
Short journeys and frequent cold starts do not allow
the engine to reach optimum operating temperature.
This results in a significant increase in consumption
levels (from +15 to +3 ...
Ford Fiesta. Towing
Towing a Trailer - 1.6L EcoBoost
WARNING
Your vehicle is not approved
for trailer towing.
Transporting the Vehicle
If you need to have your vehicle towed,
contact a professional towing service or,
i ...
Chevrolet Sonic. System Operation
The vehicle has a Traction Control System (TCS) and StabiliTrak®, an electronic
stability control system. These systems help limit wheel slip and assist the driver
in maintaining control, especia ...