
The EOBD system (European On Board Diagnosis) allows continuos diagnosis of the components of the car correlated with emissions.
It also alerts the driver, by the turning on of the
warning light
on the instrument
panel together
with the message on the reconfigurable multifunction
display (where required) (see section “Warning lights
and messages”), when these conditions are no longer
in peak conditions.
The objective is:
The system has a diagnostic connector that can be interfaced with appropriate tools, which makes it possible to read the error codes stored in the control unit, together with a series of specific parameters for engine operation and diagnosis. This check can also be performed by traffic controller agents.
IMPORTANT After eliminating the inconvenience, to check the system completely, Fiat Dealership is obliged to run a bench test and, if necessary, road tests which may also call for a long journey.
If turning the ignition
key to MAR, the warning light does not turn on or if,
while travelling it turns on glowing steadily or flashing together with the message on the reconfigurable multifunction display (where required), contact Fiat Dealership as soon as possible. Warning light operation
can be checked by means of special equipment. Always comply with the traffic regulations in force in the country where you are travelling. |
Fiat Punto. Engine codes - bodywork versions
(*) Versions with VDC
Engine
Fuel feed/ignition
Transmission
Modifications or repairs
to the fuel system that are not carried out properly or do not take the
system ...
Peugeot 208. USB port / Jack auxiliary socket
This connection box, consisting of a JACK auxiliary socket and a USB port, is
located on the centre console.
It allows the connection of portable device, such as a digital audio player of
the i ...
Mazda 2. Accessory Sockets
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
The ignition must be switched to ACC or
ON.
Type A
Type B
CAUTION
To prevent accesso ...