FASTENERS
3-door versions
Move the seal aside in the points shown in the figure to reach the fasteners.
The rear fasteners are in the areas indicated by the printed
reference
mark on the rear side windows.
To make use of the presetting couplings, remove the retainer (A) by operating on the relevant catch as shown in the figure.
5-door versions
Move the seal aside in the points shown in the figure to reach the fasteners.
The rear fasteners are in the areas indicated by the printed reference mark on the rear side windows.
Attach the roof rack brackets to the fasteners.
To make use of the presetting couplings, remove the retainer (A) by operating on the relevant catch as shown in the figure.
After few kilometers, check that fastening screws are firmly tightened.
IMPORTANT Follow the instructions provided in the kit to the letter for both versions (3 and 5 doors).
Fitting should be entrusted to skilled personnel.
IMPORTANT Never exceed the max. permissible loads (see section “Technical specifications”).
Renault Clio. Air conditioning: information and advice on use
Advice on use
In some situations, (air conditioning
off, air recirculation activated, ventilation
speed at zero or low, etc.) you may
notice that condensation starts to form
on the windows and wi ...
Mazda 2. Battery Runs Out
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure
carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent
service
...
Mazda 2. Forward Sensing Camera (FSC)
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward
Sensing
Camera (FSC) is positioned near the rearview mirror and used by the following
systems.
High Beam Control Syst ...