This device can only work when the ignition key is at MAR.
The stalk can be moved to five different positions:
With the stalk in position (B), turning the knurled ring (F), four possible intermittent speeds are obtained:
■ = very slow intermittent ■■ = slow intermittent ■■■ = intermittent medium ■■■■ = fast intermittent
Operation in position (E) is limited to the time the lever is held in this position. When the lever is released, it returns to position (A) automatically stopping the wiper.
“Smart washing” function
Pulling the stalk towards the steering wheel (unstable position) operates the windscreen washer; indeed, the latter comes into action automatically if the stalk is pulled for more than half a second.
The wiper stops working three strokes after releasing the stalk. On certain versions a further “cleaning stroke”, after a few seconds, completes the wiping operation.
Operating the stalk quickly and repeatedly (for less than half a second) it is possible to wet the windscreen several times without operating the wiper.
Never use the window
wiper to remove ice or snow from the windscreen. In these conditions, the wiper is submitted to excessive effort that results in motor protection cutting in and wiper operation inhibition for few seconds as a consequence. If operation is not restored contact Fiat Dealership. |
Peugeot 208. Automated mode
After starting the vehicle, select position A for enter automated mode.
AUTO and the gear engaged appear
in the instrument panel screen.
The gearbox is then operating in auto-active mode, without ...
Fiat Punto. Using the rear central seat belt
Seat belt without reel mechanism
To fasten the seat belt: insert the tongue (A) into the buckle (B), until
you hear it click.
To unfasten the seat belt: press button (C).
To adjust the belt: s ...
Honda Fit. Using HFL
HFL Buttons
( HFL Talk) button: Press
to go directly to give a command or to answer an
incoming call.
(HFL Back) button: Press to
end a call or to cancel a command.
Help Features
• To h ...