Honda Fit: Brake Light, Taillight, Back-Up Light and Rear Turn Signal Light Bulbs
Honda Fit Owners Manual
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
► Wrap the flat-tip screwdriver with a cloth to prevent scratches.
2. Turn the socket to the left and remove it.
Remove the old bulb.
3. Insert a new bulb.
Other info:
Honda Fit. Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
U.S. models
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by the vehicle
manufacturer on the vehicle placard o ...
Peugeot 208. Parking lamps
Side markers for the vehicle by illumination of the sidelamps on the traffic
side only.
Within one minute of switching off the ignition, operate the lighting control
stalk up or down depending ...
Skoda Fabia. Trailer
WARNING
Always drive particularly carefully with the trailer.
Loading a trailer
The vehicle/trailer combination must be balanced, whereby the maximum
permissible
drawbar load must be utilised. I ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
