B-Class car manuals
Honda Fit: Inspecting and Changing Fuses - Fuses - Handling the Unexpected - Honda Fit Owners Manual

Honda Fit: Inspecting and Changing Fuses

Honda Fit Owners Manual

Honda Fit / Honda Fit Owners Manual / Handling the Unexpected / Fuses / Inspecting and Changing Fuses


1. Turn the ignition switch to LOCK . Turn
headlights and all accessories off.

2. Check the fuses in the engine compartment.

► If the fuse is blown, have it replaced by a dealer.


3. Inspect the small fuses in the engine compartment and the vehicle interior.

► If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.

NOTICE

Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system.

Replace fuse with a spare fuse of the same specified amperage.

There is a fuse puller on the back of the engine compartment fuse box cover.

    Fuse Locations

    Emergency Towing

    Other info:

    Chevrolet Sonic. Charging System Light
    This light will come on briefly when the ignition is turned on, and the engine is not running, as a check to show it is working. It should go out when the engine is started. If it stays on, or co ...

    Renault Clio. Air conditioning: information and advice on use
    Advice on use In some situations, (air conditioning off, air recirculation activated, ventilation speed at zero or low, etc.) you may notice that condensation starts to form on the windows and wi ...

    Seat Ibiza. Diesel engine 1.9l TDI 96 kW (131 bhp)
    General engine data a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel. Performance figures Weights Trailer weights Engine oil capacity ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0084