Clock
Models without navigation system
You can adjust the time in the clock display, using the CLOCK button with the
ignition switch in ACCESSORY or ON
.
Models without navigation system
Press and hold the CLOCK button until the clock
display begins to blink, then press the
(Reset)
button.
Depending on the displayed time, the clock sets forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
Models with navigation system
The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
■Adjusting the Time
1. Press and hold the CLOCK button until the clock display begins to blink.
2. Press the 1 (Hour) button to change the hours.
3. Press the 2 (Minute) button to change the minutes.
4. Press the CLOCK button to go back to the normal display.
Skoda Fabia. Checking the oil level
Fig. 128 Principle sketch: Dipstick
The dipstick indicates the engine oil level » Fig. 128.
Checking the oil level
Ensure that the vehicle is positioned on a level surface and the engine has
...
Chevrolet Sonic. Traction Control/ Electronic Stability Control
The Traction Control System (TCS) limits wheel spin. The system is on when the
vehicle is started.
The StabiliTrak system assists with directional control of the vehicle in difficult
driving cond ...
Fiat Punto. Failure warning lights
Any failure is indicated by cluster warning light
coming on together with the message on the
reconfigurable multifunction display (where required)
(see section “Warning lights and messages”). ...