B-Class car manuals
Mazda 2: Exterior Care - Appearance Care - Maintenance and Care - Mazda2 Owners Manual

Mazda 2: Exterior Care

Mazda2 Owners Manual

The paintwork on your Mazda represents the latest technical developments in composition and methods of application.

Environmental hazards, however, can harm the paint's protective properties, if proper care is not taken.

Here are some examples of possible damage, with tips on how to prevent them.

Etching Caused by Acid Rain or Industrial Fallout

Occurrence

Industrial pollutants and vehicle emissions drift into the air and mix with rain or dew to form acids. These acids can settle on a vehicle's fi nish. As the water evaporates, the acid becomes concentrated and can damage the fi nish.

And the longer the acid remains on the surface, the greater the chance is for damage.

Prevention

It is necessary to wash and wax your vehicle to preserve its fi nish according to the instructions in this section. These steps should be taken immediately after you suspect that acid rain has settled on your vehicle's fi nish.

Damage Caused by Bird Dropping, Insects, or Tree Sap

Occurrence

Bird droppings contain acids. If these are not removed they can eat away the clear and colour base coat of the vehicle's paintwork.

When insects stick to the paint surface and decompose, corrosive compounds form.

These can erode the clear and colour base coat of the vehicle's paintwork if they are not removed.

Tree sap will harden and adhere permanently to the paint fi nish. If you scratch the sap off while it is hard, some vehicle paint could come off with it.

Prevention

It is necessary to have your Mazda washed and waxed to preserve its fi nish according to the instructions in this section. This should be done as soon as possible.

Bird droppings can be removed with a soft sponge and water. If you are travelling and these are not available, a moistened tissue may also take care of the problem. The cleaned area should be waxed according to the instructions in this section.

Insects and tree sap are best removed with a soft sponge and water or a commercially available chemical cleaner.

Another method is to cover the affected area with dampened newspaper for one to two hours. After removing the newspaper, rinse off the loosened debris with water.

Water Marks

Occurrence

Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicle's fi nish.

Prevention

It is necessary to wash and wax your vehicle to preserve its fi nish according to the instructions in this section. These steps should be taken immediately after you fi nd water marks on your vehicle's fi nish.

Paint Chipping

Occurrence

Paint chipping occurs when gravel thrown in the air by another vehicle's tyres hits your vehicle.

How to avoid paint chipping

Keeping a safe distance between you and the vehicle ahead reduces the chances of having your paint chipped by fl ying gravel.

NOTE

  • The paint chipping zone varies with the speed of the vehicle. For example, when travelling at 90 km/h (56 mph), the paint chipping zone is 50 m (164 ft).
  • In low temperatures a vehicle's fi nish hardens. This increases the chance of paint chipping
  • Chipped paint can lead to rust forming on your Mazda. Before this happens, repair the damage by using Mazda touch-up paint according to the instructions in this section.

    Failure to repair the affected area could lead to serious rusting and expensive repairs.

Follow all label and container directions when using a chemical cleaner or polish.

Read all warnings and cautions.

Maintaining the Finish

Washing

CAUTION

When the wiper lever is in the
position and the ignition is switched ON, the wipers may move automatically in the following cases:

  • If the windscreen above the rain sensor is touched or wiped with a cloth.
  • If the windscreen is struck with a hand or other object from either outside or inside the vehicle.

Keep hands and scrapers clear of the windscreen when the wiper lever is in the position and the ignition
is switched ON as fi ngers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically.

  If you are going to clean the windscreen, be sure the wipers are turned off completely (when it is most likely that the engine is left running) this is particularly important when clearing ice and snow.

  • Do not spray water in the engine compartment. Otherwise, it could result in engine-starting problems or damage to electrical parts.
  • When washing and waxing the vehicle, be careful not to apply excessive force to any single area of the vehicle roof or the aerial.

    Otherwise, you could dent the vehicle or damage the aerial.

To help protect the fi nish from rust and deterioration, wash your Mazda thoroughly and frequently, at least once a month, with lukewarm or cold water.

If the vehicle is washed improperly, the paint surface could be scratched. Here are some examples of how scratching could occur.

Scratches occur on the paint surface when:

  • The vehicle is washed without fi rst rinsing off dirt and other foreign matter.
  • The vehicle is washed with a rough, dry, or dirty cloth.
  • The vehicle is washed at a car wash that uses brushes that are dirty or too stiff
  • Cleansers or wax containing abrasives are used.

NOTE

  • Mazda is not responsible for scratches caused by automatic car washes or improper washing.
  • Scratches are more noticeable on vehicles with darker paint fi nishes.

To minimize scratches on the vehicle's paint fi nish:

  •  Rinse off any dirt or other foreign matter using lukewarm or cold water before washing.
  • Use plenty of lukewarm or cold water and a soft cloth when washing the vehicle. Do not use a nylon cloth.
  •   Rub gently when washing or drying the vehicle.
  • Take your vehicle only to a car wash that keeps its brushes well maintained.
  • Do not use abrasive cleansers or wax that contain abrasives.

CAUTION

  • Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodised aluminium parts. This may damage the protective coating; also, cleaners and detergents may discolour or deteriorate the paint.
  • (With detachable aerial)  To prevent damaging the aerial, remove it before entering a car wash facility or passing beneath a low overhead clearance.

Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the wings, and make sure the drain holes in the lower edges of the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the fi nish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles.

Thoroughly rinse off all soap with lukewarm or cold water. Do not allow soap to dry on the fi nish.

After washing the vehicle, dry it with a clean chamois to prevent water spots from forming.

WARNING

Dry off brakes that have become wet by driving slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal: Driving with wet brakes is dangerous.

Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected.

When using an automatic car wash

  • Retract the door mirrors.
  • The automatic car wash brushes could reduce the paint lustre or hasten paint deterioration.

When using a high water pressure car wash

High water temperature and high water pressure car washers are available depending on the type of car wash machine. If the car washer nozzle is put too close to the vehicle, the force of the spray could damage or deform the molding, affect the sealability of parts, and allow water to penetrate the interior.

Keep a suffi cient space (30 cm (12 in) or more) between the nozzle and the vehicle.

In addition, do not spend too much time spraying the same area of the vehicle, and be very careful when spraying between gaps in doors and around windows.

Waxing

Your vehicle needs to be waxed when water no longer beads on the fi nish.

Always wash and dry the vehicle before waxing it. In addition to the vehicle body, wax the metal trim to maintain its lustre.

  1. Use wax which contains no abrasives.

    Waxes containing abrasive will remove paint and could damage bright metal parts.

  2. Use a good grade of natural wax for metallic, mica, and solid colours.
  3. When waxing, coat evenly with the sponge supplied or a soft cloth.
  4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and similar materials will usually also take off the wax. Rewax these areas even if the rest of the vehicle does not need it.

Paint Damage Touch-up

Repair damage to the fi nish caused by stone chipping, damage during parking etc., by using Mazda touch-up paint before rust begins to form. First, remove the dirt and grease with a clean soft cloth.

If rust has already begun to form:

  1. Remove rust completely with sandpaper.
  2. Wipe with a clean soft cloth.
  3. Apply rust preventive primer to the area.
  4. After drying it completely, apply a suitable top coat material to the area.

Of course there will be no problem if you assign the work to an expert repairer, we recommend an Authorised Mazda Repairer.

Cavity Protection

Cavities are treated for protection at the factory, but additional protective treatment after the vehicle has been put into use will extend the life of the body.

We recommend that you consult an expert repairer, we recommend an Authorised Mazda Repairer concerning this additional precaution.

Bright-Metal Maintenance

  • Use tar remover to remove road tar and insects. Never do this with a knife or similar tool.
  • To prevent corrosion on brightmetal surfaces, apply wax or chrome preservative and rub it to a high lustre.
  • During cold weather or in coastal areas, cover bright-metal parts with a coating of wax or preservative heavier than usual. It would also help to coat them with noncorrosive petroleum jelly or some other protective compound.

CAUTION

Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chromeplated or anodised aluminium parts. This may result in damage to the protective coating and cause discolouration or paint deterioration.

Undercoating

This special coating is applied to the critical parts of the underside to protect vehicles from damage caused by chemicals or stones. This coating is liable to be damaged with time. Check this coating periodically.

An expert repairer, we recommend an Authorised Mazda Repairer are well informed on how repairs should be made.

Consult an expert repairer, we recommend an Authorised Mazda Repairer.

Aluminium Wheel Maintenance *

A protective coating is provided over the aluminium wheels. Special care is needed to protect this coating.

CAUTION

Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients. Otherwise, the product could discolour or stain the aluminium wheels.

NOTE

  • Do not use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminium wheels. They may damage the coating.
  • Always use a sponge or soft cloth to clean the wheels.

      Rinse the wheels thoroughly with lukewarm or cold water. Also, be sure to clean the wheels after driving on dusty or salted roads to help prevent corrosion.

  • Avoid washing your vehicle in an automatic car wash that uses highspeed or hard brushes.
  • (16-inch wheel vehicle)  If your aluminium wheels lose lustre, apply wax which contains no polishing powder.

Plastic Part Maintenance

  • When cleaning the plastic lenses of the lights, do not use petrol, paraffi n, rectifi ed spirit, paint, thinner, highly acidic detergents, or strongly alkaline detergents. Otherwise, these chemical agents can discolour or damage the surfaces resulting in a signifi cant loss in functionality. If plastic parts become inadvertently exposed to any of these chemical agents, fl ush with water immediately.
  • If plastic parts such as the bumpers become inadvertently exposed to chemical agents or fl uids such as petrol, oil, engine coolant, or battery fl uid, it could cause discolouration, staining, or paint peeling. Wipe off any such chemical agents or fl uids using a soft cloth immediately.
  • High water temperature and high water pressure car washers are available depending on the type of high pressure car washer device. If the car washer nozzle is put too close to the vehicle or aimed at one area for an extended period of time, it could deform plastic parts or damage the paint.
  • Do not use wax containing compounds (polish). Otherwise, it could result in paint damage.
  • In addition, do not use an electrical or air tool to apply wax. Otherwise, the frictional heat generated could result in deformation of plastic parts or paint damage.
    Appearance Care

    Interior Care

    Other info:

    Renault Clio. Headlight adjustment
    On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load. Turn control A downwards to lower the headlights and upwards to raise the ...

    Peugeot 208. Locking / unlocking from the inside
    Press the switch. This allows the doors and the boot to be locked or unlocked. If one of the doors is open, the doors are not locked. When locking / deadlocking from outside When the vehicle is ...

    Skoda Fabia. Cockpit
    Overview Fig. 18 Cockpit Door opening lever Electrical power windows Electric exterior mirror adjustment Air outlet vents Parking ticket holder Operating stalk: Turn signal li ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0084