The cruise control allows driving at a speed between 23 - 89 mph (37 - 144 km/h) without keeping your foot on the accelerator pedal.
To turn on the cruise control, push the ON/OFF switch. The CRUISE indicator light in the instrument panel comes on.
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. Take your foot off the accelerator pedal. Your vehicle maintains the set speed.
To cancel the preset speed, use one of the following three methods.
The cruise control is automatically canceled if:
The preset speed is deleted from memory.
To reset at a faster cruising speed, use one of the following three methods.
When the vehicle attains the speed you desire, release the switch.
Each time you do this, the set speed increases by about 1 mph (1.6 km/h).
To reset at a slower cruising speed, use one of the following three methods.
Each time you do this, the set speed decreases by about 1 mph (1.6 km/h).
To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 23 mph (37 km/h).
Seat Ibiza. Diesel engine 1.9l TDI 96 kW (131 bhp)
General engine data
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Performance figures
Weights
Trailer weights
Engine oil capacity
...
Chevrolet Sonic. Tire Sidewall Labeling
Useful information about a tire is molded into its sidewall. The examples show
a typical passenger vehicle tire and a compact spare tire sidewall.
Passenger (P-Metric) Tire Example
(1) Tire Size ...
Peugeot 208. Unlocking the vehicle Complete unlocking
Using the key
Turn the key to the front of the vehicle to unlock the vehicle.
Using the remote control
Press the open padlock
to unlock the vehicle.
Unlocking is confirmed by rapid flashing of ...