Head restraint height adjustment
To raise the head restraint, pull it upwards.
To remove the head restraint, press the lug A and pull the head restraint upwards.
To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.
To lower the head restraint, press the lug A and the head restraint at the same time.
The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.
The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly.
Access to the rear seats (3-door)
Pull only this control upwards to fold the seat back and move the seat forward.
When put back in place, the seat returns to its initial position.
Ensure that no person or object prevents the seat slide from returning to its initial position; the return to this position is necessary for longitudinal locking.
Check that the seat belt has reeled in correctly so as to not impede access for passengers to the rear seats.
Renault Clio. Passenger compartment storage space and fittings
Front door storage pockets 1
They can hold a 1.5 litre bottle.
Nothing should be placed
on the floor area in front of
the driver as such objects
may slide under the pedal
duri ...
Fiat Punto. Jacking the car
WITH THE JACK
See “If a tyre is punctured” in this section.
WITH A SHOP JACK
From the front
Jack up the car only by positioning the jack arm at the gearbox/differential
and placing a rubb ...
Chevrolet Sonic. Washer Fluid
Open the cap with the washer symbol on it. Add washer fluid until the tank is
full. See Engine Compartment Overview for reservoir location.
Caution
. Do not use engine coolant (antifree ...