Fitting the "space-saver" spare wheel
If your vehicle is fitted with alloy wheels, when tightening the bolts on fitting, it is normal to notice that the washers do not come into contact with the "space-saver" spare wheel. The wheel is secured by the conical surface of each bolt.
After changing a wheel
To store the punctured wheel in the boot correctly, first remove the central cover. When using the "space-saver" type spare wheel, do not exceed 50 mph (80 km/h).
Have the tightening of the bolts and the pressure of the spare wheel checked by a PEUGEOT dealer or a qualified workshop without delay.
Have the punctured wheel repaired and refitted to the vehicle as soon as possible.
List of operations
Peugeot 208. Manual operation
Select position M for sequential changing of the four gears.
Push the lever towards the + sign to change up a gear.
Pull the lever towards the - sign to change down a gear.
It is only possib ...
Fiat Punto. Extending the boot
Single rear seat
Proceed as follows:
fasten the seat buckles to the tabs on the seat back (as shown by
arrows);
check that the webbing (A) of each of the two side seat belts is
inserted int ...
Fiat Punto. Parking sensors
The parking system detects and informs the driver (through an
intermittent acoustic signal) about the presence of obstacles in the rear
part of the car.
ACTIVATION
The sensors are automaticall ...