A. Model with light guide
1. Main beam headlamps (H7-55W).
2. Dipped beam headlamps (H7-55W).
3. Daytime running lamps / sidelamps (light emitting diodes - LEDs).
4. Direction indicators (PWY-24W).
5. Front foglamps (directional according to version) (H11-55W)).
B. Model without light guide
1. Main beam headlamps (H7-55W).
2. Dipped beam headlamps (H7-55W).
3. Daytime running lamps / sidelamps (W5-5W).
4. Direction indicators (PWY-24W).
5. Front foglamps (directional according to version) (H11-55W).
In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
Changing direction indicator bulbs
Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side.
To reassemble, carry out these operations in reverse order.
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour.
When refitting, close the protective cover carefully to preserve the sealing of the headlamp.
Changing dipped beam headlamp bulbs
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom (model A ) or at the top (model B) .
Changing main beam headlamp bulbs
To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom.
Changing daytime running lamp / sidelamp bulbs
Turn the bulb holder a quarter turn and pull it out.
Pull out the bulb and replace it.
To reassemble, carry out these operations in reverse order.
Changing the daytime running lamps / sidelamps (light-emitting diodes - LEDs)
For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.
Changing front foglamp / directional lamps
To reassemble, carry out these operations in reverse order.
To obtain this module, contact a PEUGEOT dealer or a qualified workshop. You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.
Changing integrated direction indicator side repeater bulbs
To reassemble, carry out these operations in reverse order.
You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs.
Peugeot 208. Instrument panels
1. Cruise control / speed limiter controls.
2. Steering mounted controls for the touch screen.
3. Wiper / screenwash / trip computer stalk.
4. Lighting and direction indicator stalk
5. Bonnet re ...
Citroen C3. Recommendations for ventilation and air
conditioning
In order for these systems to be fully effective, follow the operation and
maintenance guidelines below:
To obtain an even air distribution, take care not to obstruct the
exterior
air inta ...
Mazda 2. Child-Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small
enough to use
them.
Mazda recommends use of a Mazda genuine child-restraint system or one that
complies with
the UNE ...