The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity of the impact, the pretensioning system instantly tightens the seat belts against the body of the occupants. The pretensioning seat belts are active when the ignition is on.
The force limiter reduces the pressure of the seat belt on the chest of the occupant, so improving their protection.
Fastening
Pull the strap, then insert the tongue in the buckle.
Check that the seat belt is fastened correctly by pulling the strap.
Unfastening
Press the red button on the buckle.
Guide the seat belt as it reels in.
Height adjustment (5-door)
To lower the attachment point, squeeze the control A and slide it downwards.
To raise the attachment point, slide the control A upwards.
Seat belt not fastened / unfastened warning lamp in the instrument panel
When the ignition is
switched on, this warning lamp comes on in the instrument panel if the driver and/or
the front passenger has not fastened their seat belt.
From approximately 12 mph (20 km/h) this warning lamp flashes for two minutes accompanied by an audible signal of increasing volume. Once these two minutes have elapsed, this warning lamp remains on until the driver and/or the front passenger fastens their seat belt.
Citroen C3. Side airbags
System which protects the driver and
front passenger in the event of a serious
side impact in order to limit the risk
of injury to the chest.
Each side airbag is built into the seat
backrest ...
Mazda 2. Scheduled Maintenance
NOTE
After the prescribed period, continue to follow the described
maintenance at the
recommended intervals.
As the result of visual examination or functional measurement of a
system's o ...
Nissan Micra. Replacing
Replace the wiper blades if they are worn.
To replace the windshield wiper blades, follow
the procedure below:
Lift the wiper arm away from the windshield.
Push the release tab B .
Mov ...