B-Class car manuals
Peugeot 208: Operating fault - Automatic gearbox - Driving - Peugeot 208 Owners Manual

Peugeot 208: Operating fault

Peugeot 208 Owners Manual

When the ignition is on, the lighting
of this warning lamp, accompanied by an audible signal and a message in the multifunction screen, indicates a gearbox fault.

In this case, the gearbox switches to back-up mode and is locked in 3rd gear. You may feel a substantial knock when changing from P to R and from N to R . This will not cause any damage to the gearbox.

Do not exceed 60 mph (100 km/h), local speed restrictions permitting.

Contact a PEUGEOT dealer or a qualified workshop as soon as possible.

There is a risk of damage to the gearbox:

- if you press the accelerator and brake pedals at the same time, - if you force the movement of the gear lever from the P position to another position when the battery is flat.

To reduce fuel consumption when at a prolonged standstill with the engine running (traffic jam...), put the gear lever in the N position and apply the parking brake.

    Stopping the vehicle

    Stop & Start

    Other info:

    Renault Clio. Speed limiter
    The speed limiter function helps you stay within the driving speed limit that you choose, known as the limit speed. Controls Main “On/Off” switch. Limit speed activation, storage ...

    Ford Fiesta. Wipers and Washers
    Windshield Wipers Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Install new w ...

    Chevrolet Sonic. Battery Load Management
    The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery. Wh ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.011