Peugeot 208: Switching the engine off
Peugeot 208 Owners Manual
- Immobilise the vehicle.
- Turn the key fully towards you to position 1 (Stop) .
- Remove the key from the ignition switch.
Free wheeling
For safety reasons, do not free wheel. If free wheeling, some vehicle functions will no longer be active.
A heavy object (key fob...), attached to the key and weighing down on its shaft in the ignition switch, could cause a malfunction.
Key left in the "Ignition on" position
On opening the driver's door, an alert message is displayed, accompanied by an audible signal, to remind you that the key is still in the ignition switch at position 1 (Stop).
If the key has been left in the ignition switch at position 2 (Ignition on), the ignition will be switched off automatically after one hour. To switch the ignition back on, turn the key to position 1 (Stop) , then back to position 2 (Ignition on).
Other info:
Nissan Micra. Instrument brightness control
The instrument brightness control operates when
the headlight control switch is in the
or position.
Push the control A to adjust the brightness of
instrument panel lights when driving at n ...
Skoda Fabia. Raising the vehicle
Fig. 142 Jacking points for positioning lifting jack
Fig. 143 Attach lifting jack
Position the car jack below the jacking point closest to the flat tyre » Fig.
142.
The jacking point i ...
Renault Clio. Luggage compartment cover: estate version
To remove the flexible section of the luggage compartment cover 1
Pull handle 2 gently to release the pins
from their mounting points located on
each side of the luggage boot.
Guide the lugg ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
